How should I stress test the property?
Last updated January 19, 2023
We recommend conducting a stress test to check to see if your property is ready to be occupied by PadSplit Members:
Plumbing
- Run showers and sinks for 10 minutes to ensure water runs both cold and hot and all drainage works properly
- Plug and fill tubs then let the tub drain. The tub should drain completely in less than 5 minutes
- Flush the toilet 10 times to check for any back-ups
- Check the handle of each toilet and plumbing fixture to ensure that it is installed tightly and does not move
Electrical
- Test to make sure that every outlet functions
- Test every GCFI outlet with a tester
- Turn on all lights to check for flickering
Safety
- Test every smoke detector
- Test every interior and exterior lock to make sure it functions
Structural
- Open and close every door ensuring that each sits correctly in its frame
- Open and close all cabinets
- Lean your full body-weight on all railings to ensure their stability
Appliances/HVAC
- Turn on the stove to test for heat
- Turn on the oven for 10 minutes to check for smoke
- Test the dryer for 10 minutes to ensure functionality
- Run the air conditioning and heat for 10 minutes each, making sure that air filters are present in the system
Keep in mind that no system is completely foolproof. However, passing these tests reduces the risk of you facing costly maintenance bills after opening the property.
Was this article helpful?
📁
The Finishing Touches Before Listing Your PadSplit
Helpful tips for getting your property listed on PadSplit -- including move-in and parking instructions.